China wholesale Extrusion Plastic Mould Supplier – Gasoline filling-gun housing parts – DT-TOTALSOLUTIONS
China wholesale Extrusion Plastic Mould Supplier – Gasoline filling-gun housing parts – DT-TOTALSOLUTIONS Detail:
In the picture is a housing for “clean way fuel fill” gasoline filling gun. The part is strong with very neat and clean surface.
Tool is 1+1 with total weight of the 2 parts is about 3-kgs. The material for the housing is PC+GF so additional attention for flow is required. The internal ribs are very deep so filling and venting are both critical.
The mold was shipped to the USA. All the standard components are DME standard so customer can have replaceable components easily.
PC+GF needs very high temperature in mold for molding, so the tool must be in hard with steel of heat-treatment. Before starting, a very detailed mold-flow analysis on plastic flow, part deformation and air trapping are required especially when considering the long-ribs inside of the housing.
The fitting between 2 parts is critical to ensure and they are to be sonic-welded, no fuel leaking is allowed after assemble. So the deformation of both part must be strictly controlled.
In these 2 parts, sufficient venting is super important. For all the long ribs inside part, we made sub inserts from porous steel so that there are no air trapping issue even after thousands of or millions of parts produced in long term.
When shipping tools abroad, we usually will provide below information together:
– Final part drawings in 2D, 3D + final mold design drawing in 2D and 3D with detailed BOM list included.
– EDM programming
– Mold test videos and pictures + molding parameters; samples FAI reports
– Measurement report for final core, cavity and critical sub inserts.
– Finish electrodes in case customer need do engineering change.
– For some tools especially for complex molds and multi-cavity tools, we would provide additional spare inserts / parts
If customers have special requirement for the shipping documents, we would strictly follow as well.
All the tools we shipped, we can provide post service for mold change or engineering change.
Please feel free to contact us at any time if you need our service or have technical issues want to discuss with us!
DT-TotalSolutions provide 7days*24hours service!
Product detail pictures:
Related Product Guide:
We're going to dedicate ourselves to offering our esteemed shoppers with the most enthusiastically considerate solutions for China wholesale Extrusion Plastic Mould Supplier – Gasoline filling-gun housing parts – DT-TOTALSOLUTIONS , The product will supply to all over the world, such as: Czech , Ireland , Bangladesh , Our expert engineering team will generally be prepared to serve you for consultation and feedback. We are able to also offer you with free of charge samples to meet your requirements. Best efforts will likely be produced to provide you the best service and merchandise. When you are keen on our business and products, please speak to us by sending us emails or call us quickly. In an effort to know our products and company extra, you may come to our factory to view it. We will generally welcome guests from all over the world to our business to create business relations with us. Please feel cost-free to speak to us for small business and we believe we'll share the best trading experience with all our merchants.
